Operating commands for an LGB solenoid accessory can be transmitted simply through the track with this turnout decoder for 4 circuits designed for the new LGB digital system. Simply connect your turnouts, signals, and accessories to a turnout decoder. This turnout decoder is connected to the track. Features: four command outputs. / the mode can be set for each output: normal (for turnouts and signals), synchronous blinking (for lights), asynchronous blinking (for lights), on/off (for lights and accessories) / adjustable switching duration for normal, synchronous, and asynchronous. Backwards compatible with the MTS 1 to MTS III. This turnout decoder can also be used with the LGB hand controller and by means of the MTS interface (LGB 55060). This product is not weatherproof and must be protected from moisture. 80 x 70 x 20 mm / 3-1/8" x 2-3/4" x 3/4".