Lionel 681946 6-81946 O 036 o36 Remote/Command FasTrack Switch RH

• FasTrack® is designed to by easily assembled into an infinite number of designs and provide reliable performance for your trains.

  • Includes 1/4 curve to complete O36 45-Degree curve
  • Flawless non-derailing function allows trains to keep running regardless of switch position
  • Plug and play using track voltage or auxiliary power
  • Auxiliary power and TMCC™ (ASC and SC-2) terminals are conveniently located under the roadbed base, making all connections invisible from above
  • Realistic illuminated switch lantern
  • Lantern base is interchangeable, can move to the right or left side
  •  
  PRODUCT SPECIFICATIONS:
•  
  • Gauge: O Gauge 
  • Brand: Lionel
  • Power: Electric
  • Dimensions: Length: 10" Straight, 33 3/4-Degree turnout

Track curves are measured from CENTER RAIL TO CENTER RAIL. The actual area the track takes up is a few inches more to include the track bed. O-31 Curves need 8 curve track pieces for a complete circle – Approximate area will be 3 feet O-36 Curves need 8 curve track pieces for a complete circle - Approximate area will be 3.5 feet O-48 Curves need 12 curve track pieces for a complete circle - Approximate area will be 4.5 feet O-60 Curves need 16 curve track pieces for a complete circle - Approximate area will be 5.5 feet O-72 Curves need 16 curve track pieces for a complete circle - Approximate area will be 6.5 feet O-84 Curves need 32 curve track pieces for a complete circle- Approximate area will be 7.5 feet O-96 Curves need 32 curve track pieces for a complete circle- Approximate area will be 8.5 feet

***Switch lights will not function properly when using a Lionel DC power supply. Starter Set 40 Watt Power Pack Transformer OR a Lionel 72 Watt 6-81603 Power Pack Transformer. The remote will function correctly, but the green and red lights on the remote will not function correctly***

***The Switch Controller included will NOT Operate from Green to Red or Red to Green using this Controller*** 

***A Lionel AC Transformer must be used to maintain efficiency with these Switches and their respective Switch Controllers, 
   as an aside, the Switch Lever MUST be Fully engaged back and forth until it clicks to change the Signal colors***