NCE 524007 | 5240007 PH10R 10 Amp Wireless Starter Set with D408 decoder

The PH10-R is a wireless equipped system. It is designed to eliminate the need for a tethered throttle. All features of the Pro Cab are usable while in radio mode. Up to 60 additional radio and tethered cabs can be used simultaneously. The PH-10 has all the same features as our Power Pro 5 Amp system described previously, but with a whopping 10 Amps of power for O-Scale and Large Scale (G) layouts. Requires a 18V, 10-12 amp power supply such as the Brutus (part number 5240241)

Contents of the PH10R System:
Powerhouse System Box (CS02) with 4 pin Power/Program Track Plug
18v 1amp DC Power Supply for CS02
Powerhouse 10 amp Booster box (PB110a) with 4 pin Power plug and 4 pin track plug
Pro Cab Throttle
Coiled cable for cab - 6 wire RJ12 cab bus cable
Seven foot flat cable for cab - 6 wire RJ12 cab bus cable
Twelve inch flat cable - 4 wire RJ-H control bus cable
UTP cab bus panel
D408 4 amp Locomotive Decoder
Power Pro system reference manual

Click here for the manual from NCE Information Station

Don't forget to use a REAL surge protector not a power strip

We highly recommend a DCC track output Circuit Breaker like the EB1 v1.1

NCE 5240225 (EB1) Single output electronic circuit breaker (1.5-8 Amps)
Highly recommended,should be used to protect "all" power supplies and boosters